HVAC and Mechanical Supplies for Contractors and Facilities Teams

HVAC and mechanical supplies include the air filters, belts, electrical components, motors, controls, and maintenance products that keep heating, cooling, and ventilation equipment running. Tribune Supply supplies them to HVAC contractors, mechanical contractors, facilities maintenance teams, and public agencies. Pricing is by custom quote based on your parts list and quantities.

What to Check Before Ordering HVAC Parts and Filters

Most HVAC ordering errors come from incomplete specs. A model number, a nameplate photo, or the exact rating usually settles it.

Order filters by actual size and MERV. Filters are labeled with a nominal size (for example, 20 x 25 x 1) that differs slightly from the actual dimensions. Depth matters: 1-inch, 2-inch, and 4-inch filters are not interchangeable. MERV ratings, defined in ASHRAE Standard 52.2, run from 1 to 16 for general HVAC filters. Many commercial buildings use MERV 8 to MERV 13. Higher MERV captures smaller particles but can restrict airflow, so confirm the equipment can handle it.

Build a filter changeout schedule. Facilities with many units save time and money with a standing filter order matched to each unit's size and change interval.

Match belts by section and length. V-belts are identified by cross-section (such as A or B, or 4L and 5L for light-duty) and length. Read the code printed on the old belt or use the equipment's parts list.

Match electrical parts to the rating. Run and start capacitors must match the microfarad (µF) rating and meet or exceed the voltage rating. Contactors must match coil voltage, pole count, and amp rating. Motors must match horsepower, voltage, phase, rpm, rotation, frame, and shaft size. A photo of the nameplate is the fastest way to get this right.

Know the refrigerant rules. Under EPA Section 608, sales of most refrigerants are restricted to certified technicians. Have certification details ready if you order refrigerant.

Do not forget maintenance consumables. Coil cleaner, condensate pan treatments, foil duct tape, mastic, insulation, and fin combs belong on every preventive maintenance list.

Products We Quote

Product
Typical specs
Pleated air filters

1, 2, and 4 in. depths, MERV 8 to 13

Bag and rigid filters

For air handlers and rooftop units

V-belts

A, B, 4L, 5L sections and lengths

Capacitors

Run and start, by µF and voltage

Contactors and relays

By coil voltage, poles, and amps

Motors

Condenser fan and blower motors by nameplate spec

Thermostats and controls

Programmable and non-programmable

Coil cleaners

Foaming, for condenser and evaporator coils

Condensate treatments

Pan tablets and line cleaners

Duct sealing supplies ..............................Foil tape, mastic, insulation

MERV Ratings at a Glance


MERV range
Typical captures
Common use
MERV 1 to 4

Large dust, lint

Basic equipment protection

MERV 5 to 8

Mold spores, dust

General commercial buildings

MERV 9 to 12

Finer dust, some smoke

Offices, schools, upgraded systems

MERV 13 to 16

Fine particles, many bacteria

Higher indoor air quality goals, healthcare

Power and Battery

Fine particles, many bacteria

Built-in rechargeable lithium‑ion battery

Who This Is For

  • HVAC and mechanical contractors
  • Facilities maintenance teams running preventive maintenance
  • Schools and municipal buildings with filter changeout schedules
  • Property managers with rooftop units across several sites

Frequently Asked Questions

Why is my filter labeled differently from its measured size?

Filters carry a nominal size that is rounded up. The actual size is usually about half an inch smaller. Order by the size printed on the existing filter frame.

What MERV rating should we use?

Many commercial buildings use MERV 8 to 13. Check your equipment's specifications before moving to a higher rating, since higher MERV can restrict airflow.

Can you match a motor or capacitor from a photo?

Yes. Send a clear photo of the nameplate or label. We will quote the matching part or a compatible replacement.

Can you quote a recurring filter program?

Yes. Send a list of units, filter sizes, MERV ratings, and change intervals. We will quote scheduled deliveries.

Related Categories

Send your unit list or parts photos.

We will send a custom quote

Download The Facility Supply Buyer's Guide: build lists, set pars & compare quotes today. Click to learn more