Floor care chemicals include the cleaners, strippers, sealers, and finishes used to clean and protect hard floors, plus the chemicals used to clean carpet. TribuneSupply supplies them to janitorial companies, floor care contractors, schools, and facilities teams. Pricing is by custom quote based on product, container size, and quantity.

Floor care is a system. The cleaner, the finish, and the stripper should work together, and all of them must suit the floor.
Start with the floor type. Vinyl composition tile (VCT) is usually sealed and finished, then stripped and refinished on a cycle. Luxury vinyl tile and sheet vinyl often have factory coatings, and many manufacturers limit stripping or finishing. Sealed concrete, terrazzo, and stone each need compatible cleaners. Wood needs products made for wood. Always check the flooring manufacturer's care instructions before choosing a program.
Use a neutral cleaner for daily work. A pH-neutral cleaner removes soil without dulling or softening floor finish. Harsher cleaners used daily shorten the life of the finish and force earlier stripping.
Pick a finish by traffic and maintenance. Floor finishes vary by solids content, durability, and gloss. Higher-solids finishes build a thicker protective layer in fewer coats. High-traffic areas maintained with high-speed burnishing need a finish designed to respond to burnishing. Low-maintenance areas may do better with a finish built for spray buffing or no buffing at all.
Match the stripper to the finish. Strippers break down old finish so it can be removed. Some are low-odor or no-rinse, which helps in occupied buildings. Follow dwell times and rinse instructions, since stripper residue can keep new finish from bonding.
Do not skip the sealer where it applies. On porous floors such as concrete and some VCT, a sealer coat under the finish fills pores and reduces the number of finish coats needed.
Plan carpet care separately. Carpet programs use pre-sprays, extraction detergents, encapsulation chemicals, and spot removers. Encapsulation suits frequent interim cleaning. Hot water extraction handles deep restorative cleaning.
Buy concentrates in the right container. Quarts and gallons suit small crews and occasional use. Five-gallon pails and drums suit summer refinishing projects and high-volume programs. Dilution systems keep mixing consistent and reduce waste.
Keep SDS on file. Every chemical needs a Safety Data Sheet available to staff. Ask for SDS with your quote.
Product | Typical specs |
|---|---|
Neutral floor cleaner | Concentrate, daily use, quart to 5-gal |
Floor stripper | Standard or low-odor, 1-gal to 5-gal |
Floor sealer | For porous floors, 5-gal |
Floor finish | Varying solids and gloss, burnishable or low-maintenance, 5-gal |
Restorer and spray buff | For interim gloss maintenance |
Degreaser and heavy-duty cleaner | Kitchens, garages, shop floors |
Carpet extraction detergent | For hot water extraction machines |
Encapsulation cleaner | For interim carpet cleaning |
Carpet spot remover | Ready-to-use spray |
Floor Type | Daily cleaning | Protection | Periodic Work |
|---|---|---|---|
VCT | Neutral cleaner | Sealer plus finish | Scrub and recoat, strip and refinish |
Luxury vinyl | Neutral cleaner | Per manufacturer | Per manufacturer |
Sealed concrete | Neutral cleaner | Sealer or finish | Scrub and recoat |
Terrazzo and stone | Neutral cleaner | Stone sealer | Polish or re-coat |
Carpet | Vacuum, spot clean | Not applicable | Encapsulation, extraction |
Floor care contractors and strip-and-wax crews
Janitorial companies with daily floor maintenance
School custodial departments planning summer refinishing
Facilities teams maintaining offices, hospitals, and retail floors
It depends on the finish, the floor, and traffic. Many programs apply several coats after stripping. Follow the finish label and your flooring manufacturer's guidance.
Sometimes, but many LVT manufacturers restrict stripping or finishing. Check the manufacturer's care guide before you start.
It cleans without attacking floor finish, so the finish lasts longer between strip jobs.
Yes. Send the square footage, floor types, and the number of coats planned, and we will quote stripper, sealer, finish, and pads.
Do you supply SDS for floor chemicals?
Yes. SDS documents are available on request with any quote.
Download The Facility Supply Buyer's Guide: build lists, set pars & compare quotes today. Click to learn more